Contract Details
Title

: Ii.2.2) Additional Cpv Code (s) 38432200 Ii.2.3) Place Of Performance Nuts Code: Hu321 Main Site Or Place Of Performance: University Of Debrecen, Faculty Of Public Health (4028 Debrecen, Kassai Út 26.) Ii.2.4) Description Of The Contract: A System Suita Hungary

Country
Language
English
Organization
Published Date
21.03.2024
Awarded Date
24.08.2018
Overview
Contract Award's Details : : Ii.2.2) Additional Cpv Code (s) 38432200 Ii.2.3) Place Of Performance Nuts Code: Hu321 Main Site Or Place Of Performance: University Of Debrecen, Faculty Of Public Health (4028 Debrecen, Kassai Út 26.) Ii.2.4) Description Of The Contract: A System Suita Debreceni Egyetem AK01719 Egyetem tér 1. Debrecen 4032 Hungary Contact person: Dr.Nagy-Stieber Elek László Telephone: +36 52512700/74490 E-mail: nagy.stieber.elek@fin.unideb.hu Fax: +36 52258670 NUTS code: HU321 : Ii.2.2) Additional Cpv Code (s) 38432200 Ii.2.3) Place Of Performance Nuts Code: Hu321 Main Site Or Place Of Performance: University Of Debrecen, Faculty Of Public Health (4028 Debrecen, Kassai Út 26.) Ii.2.4) Description Of The Contract: A System Suita Contract award notice: : ii.2.2) additional cpv code (s) 38432200 ii.2.3) place of performance nuts code: Hu321 main site or place of performance: University of debrecen, Faculty of public health (4028 debrecen, Kassai út 26.) ii.2.4) description of the contract: A system suitable for standardized integrated lipidomics based on mass spectrometry. The system should have a protocol covering the workflow required to measure the lipid molecule level of the lipid composition of the plasma, The required standards, The high throughput mass spectrometric method required for the measurement and the qualitative and quantitative evaluation of the data with the software for inclusion in the table. An entire system comprising: - equipped with a triple quadrupole mass spectrometer ion mobility unit - ultra high pressure liquid chromatograph - data processing and evaluation software - internal standards and kits for setting - nitrogen generator - start-up, 4 + 1-day on-site training and method setting. The system should have an automatic sample dispenser with an injection volume of at least 0.1 to 50 microns. The controller and data processing software should allow the complete ms / ms system to be monitored. Be fully computer controlled ion source parameters. Operating conditions: 230 v, 50 hz. The device is ce certified. Seller shall deliver the goods at the place of delivery at a place specified by the buyer, And seller shall perform the on-site commissioning and assembly tasks. Seller is obliged to teach the operation and use of the device when it is in operation for a period of 2 x 8 hours. The seller is also required to teach the work phases of the lipid analysis for 2 x 8 hours, And after 5 working days to keep repeating lessons in a 1 x 6 hour period. The training involves exactly 4 people. A 321/2015. (x. 30.) on the basis of article 46 para. (3), If the documentation (technical specification of the procurement) specifies a standard, Technical approval, Technical specification, Technical recommendation, Or make, Origin or type of thing, Procedure, A title, A patent or a trade mark, The name is only given for a clear definition of the nature of the subject and, In addition to the designation, Must be understood as or equivalent, On the basis of which the contracting authority is obliged to accept a solution better than the one set out in the documentation. Tenderer - if it is an equivalent tool, Solution, Etc. Instead of the technical content concerned. In its tender, It is obliged to submit a document (s) supporting its equivalence. The contracting authority shall draw the attention of the tenderers that the document supporting equivalence may, In particular, Be (but not exclusively) a technical documentation from the manufacturer or an independent, Professionally recognized organization. The quality and functional requirements of the products to be pu Hungary Contract value : See in details Contractors : PER-FORM HUNGÁRIA KFT. See in details 25/08/2018 22/11/2018 11621736 25/08/2018 Debreceni Egyetem AK01719 Egyetem tér 1. Debrecen 4032 Hungary Contact person: Dr.Nagy-Stieber Elek László Telephone: +36 52512700/74490 E-mail: nagy.stieber.elek@fin.unideb.hu Fax: +36 52258670 NUTS code: HU321 Address : Hungary Hungary Contract Awards Hungary 366651-2018 See in details 22/11/2018 See in details
NAICS
Nonferrous Metal (except Copper and Aluminum) Rolling Navigational Bolt Electric Power Transmission Nonferrous Metal (except Copper and Aluminum) Rolling Copper Rolling Turned Product and Screw Administration of Human Resource Programs (except Education Copper Rolling Other Aluminum Rolling Colleges Colleges Measuring Navigational Colleges Machine Shops; Turned Product; and Screw Administration of Human Resource Programs (except Education
CPVS
Tools System, storage and content management software package Mains Generators Control, safety, signalling and light equipment Nuts Lavatory seats, covers, bowls and cisterns Mass spectrometer Control, safety or signalling equipment for inland waterways Training, workout or aerobic services Parts of computers Feasibility study, advisory service, analysis Document creation, drawing, imaging, scheduling and productivity software package Control, safety or signalling equipment for parking facilities Command, control, communication systems Supports Document creation, drawing, imaging, scheduling and productivity software development services Control, safety or signalling equipment for port installations Command, control, communication and computer systems Dispensers System, storage and content management software development services Monitors Pressure-reducing, control, check or safety valves Tables Control, safety or signalling equipment for roads Nitrogen Tool parts Control, safety or signalling equipment for airports Tables, cupboards, desk and bookcases Tools, locks, keys, hinges, fasteners, chain and springs Chromatographs
UNSPSC
-
Regions
Eastern Europe Europe
Sectors
Automobiles and Auto Parts Non-Renewable Energy Supply Solar Photovoltaic PV Energy Postal and Courier Services Roads and Highways-Bridge Infrastructure Printing and Publishing Education and Training Construction Energy-Power and Electrical Computer Hardwares and Consumables Marine
Contractor
Contract Value
See in details
URL
Share
To be notified
when a tender matching your filter is published
To Follow
Tenders
Add New Tender Alert
To Follow
Contracts
Add New Contract Alert
To Follow
Fairs
Add New Fair Alert