Tender Details
Title

HEIRSHOLDINGS OIL AND GAS LIMITED-INVITATION TO TENDER FOR PROVISION OF CIVIL ENGINEERING WORKS IN OML 17 NGO Procurement Portal

Country
Language
English
Organization
Published Date
14.12.2022
Deadline Date
05.12.2024
Overview
HEIRSHOLDINGS OIL AND GAS LIMITED-INVITATION TO TENDER FOR PROVISION OF CIVIL ENGINEERING WORKS IN OML 17 SuperAdminInvitation To TenderDecember 14, 2022HEIRSHOLDINGS OIL AND GAS LIMITED (RC NO. 1515696)TENDER OPPORTUNITYTENDER OPPORTUNITY HHOG-PHC-ENG-2022-057 PROVISION OF CIVIL ENGINEERING WORKS IN OML 17SHOPPING CART NAME: HEIRSOIL. 00000025SHOPPING CART NUMBER: 10000063351. INTRODUCTIONHEIRSHOLDINGS OIL & GAS LIMITED (hereinafter referred to as “HHOG”) seeks interested and pre-qualified Contractors for Provision Civil Engineering works in OML 17 on a call-off basis as detailed in item 2 below. The contract is proposed to commence in Q1 2023 and continue for duration of three (3) years with an option to extend for an additional period of Two (2) year.2. SCOPE OF SERVICES:The scope and services required for this site preparation are listed below:a. Mobilization of Personnel, equipment & construction materials to sitesb. Site clearance & earthworks involving bush clearing, stripping of topsoil and sharp sand fillingc. Concrete & Drainage Works involving excavation, blinding with concrete grade 15, reinforcement fabrications and fixing and casting of concrete grades 25, 30 and 35d. Pavement and Surfacing Works involving priming with MC0/MC1 and Hot Rolled Asphalt.e. Blockwall Fencing involving Sandcrete Block works and reinforced concrete foundations, columns and cappingf. Embankment protection with grasses on topsoil, stone pitching, sheet piling, etc.g. Piling works where required involving supply and driving in of Pre-cast Concrete Piles, Steel Cased Piles, Bored Piles, Continuous Flight Auger (CFA) Piles, Concrete and Steel Sheet Pilesh. Steel Works involving fabrication of Steel Gratings, Structural Steel Works, Iron Gates etc.i. Demobilization, including the demobilization of all CONTRACTOR’s resources from site, Site clean-up, reconciliation to HHOG’s satisfaction3. MANDATORY REQUIREMENTS:3.1 To be eligible for this tender exercise, interested Tenderers are required to be pre-qualified in the Civil Works/ Building Contracting Services including Drilling/Tunneling: 3:05:08 (Product/service) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified Contractors in this category will receive invitations to Tender.3.2 To determine if you are pre-qualified and view the services category you are listed for; you may login to vendors.nipex.ng.com and access NJQS with your log in details. Click on ‘continue joint qualification scheme tool. Click on ‘check my supplier status’ and thereafter click on ‘supplier product group’.3.3 If you are not listed in a product/service category that you are registered with at DPR now Nigerian Upstream Regulatory Commission (NURC) to do business. You may contact Nipex’ office at 8 Bayo Kuku Road, Ikoyi. Lagos. With your DPR or (NURC) certificate as evidence for necessary update.3.4 To initiate the JQS pre-qualification process. You may access www.nipex.ng.com to download the requisite application form, make necessary payments and contact NipeX office for further action.3.5 In addition, Tenders shall also be required to comply with the Nigerian content requirements in the Nigerian oil & Gas industry content development Act 2010.4. NIGERIAN CONTENT REQUIREMENTS:Tenders are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nnpcgroup.com and www.nigcontent.com. In view at the fact that non-compliance will constitute a total flow in all contract evaluations.The Nigerian Content Development Monitoring Board (NCDB) will require each tenderer to;• Demonstrate that the entity proposed for execution of the service, is a Nigerian registered company or Nigerian registered company as the contracting entity in genuine alliance or joint venture with foreign company with details and scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria• Furnish details of company ownership and shareholding structure. With photocopies of its CAC forms CO2 and CO7• Provide evidence of what percentage of its key management positions are held by Nigerian and what percentage of the total work force are Nigerians. And show overall percentage of work to be performed by Nigerian resources relative to total work volume.• Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.• State proposed total space of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices.• In line with the NCD Human Capacity Development Initiative, Bidder shall commit to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or approved NCDMB training institution(s).• Provide evidence of domiciliation of the location of in-country facilities (Equipment, storage, repair and maintenance facilities)• Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services• Provide details on any other Nigerian Content initiative the company is involved in.5. CLOSING DATEOnly Tenderers who are registered with NJQS Product Group 3.05.08 Civil works/ Building Contracting Services including Drilling/Tunneling as at 4pm on 13th January 2023 being the advert closing time/date shall be invited to submit Technical and Commercial Bids.6. GENERAL CONDITIONS• PLEASE note that all interested contractors are required to strictly adhere to the following conditions in relation to their response to this advert.• All cost incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.• This advert shall neither be construed as any form of commitment on the part of HHOG to award any contract to any contractors and or associated contractors. Sub-contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from HHOG and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.• The tendering process shall be undertaken in accordance with NNPC Contracting process which requires pre-qualified Contractors to submit their documentation in the following manner: Pre-qualified contractors in the relevant services category in NJQS will be requested to submit their Technical and Commercial tenders at the same time, double Envelope Tender (DET). Following the Technical evaluation process, only technically acceptable and financially qualified contractors will have their commercial tenders opened and evaluated.HHOG will communicate only with authorized officers of the qualifying Contractors at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.Please visit the NipeX portal at www.nipex.ng.com for this advert and other relevant information.ES/NCDMB/HHOG/ADV/IPPG/200922/ PHC-ENG-2022-057: PROVISION OF CIVIL ENGINEERING CONSTRUCTION WORKS IN OML 17Save this Tender NGO Procurement Portal
NAICS
Business Sand Other Foundation Brick Other Foundation Regulation and Administration of Communications Brick Automatic Environmental Control Manufacturing for Residential Construction Architectural Machinery Commercial Regulation and Administration of Communications Agriculture Foundation Research and Development in the Physical Management Research and Development in the Physical Construction Process Logging
CPVS
Topsoil Tools Fencing, railing and safety equipment installation work Parts of structures Earthmoving and excavating machinery, and associated parts Gases Ornamental plants, grasses, mosses or lichens Iron, lead, zinc, tin and copper Repair, maintenance and associated services related to aircraft and other equipment Foundation work Bindings Construction work for pipelines, communication and power lines, for highways, roads, airfields and ra... System, storage and content management software package Embankment works Site preparation work Sand Concrete piles Construction, foundation and surface works for highways, roads Oil, petrol and air-intake filters Iron Engineering, auxiliary, average, loss, actuarial and salvage insurance services Boards Piling Repair, maintenance and associated services related to marine and other equipment Asphalt Fabrication work Rolls Structural works Repair, maintenance and associated services related to aircraft, railways, roads and marine equipment Wells construction work Pitch Training, workout or aerobic services Pile Blinds Office, school and office equipment cleaning services Sheet piling Construction work Blocks Structures and parts Foundation work for highways, roads, streets and footpaths Concrete Construction work for highways, roads System, storage and content management software development services Forms Aircraft or spacecraft equipment, trainers, simulators and associated parts Concrete work Repair, maintenance and associated services related to roads and other equipment Logs Gates Other services Strip Steel Drainage works Seats, chairs and related products, and associated parts Keys Envelopes Goods used in construction Envelopes, letter cards and plain postcards Furnishing Repair, maintenance and associated services of vehicles and related equipment Pipeline, piping, pipes, casing, tubing and related items Architectural, construction, engineering and inspection services Gravel, sand, crushed stone and aggregates Casing Repair, maintenance and associated services related to personal computers, office equipment, telecomm... Tool parts Repair, maintenance and associated services related to railways and other equipment Tools, locks, keys, hinges, fasteners, chain and springs
UNSPSC
Stone Sand Logs Carts Augers Piling Asphalts Asphalt Pitch Blocks Awards Business cases Storage General goods storage Well engineering Photocopying Equipment cases Fencing Go cart Surface Gates Double room Case making services Financial Instruments, Products, Contracts and Agreements Cart, Baggage (Passenger) Tent, for office use Training, Technical: Crew Resource Management, Emergency Procedures, Dangerous Goods Cart, Baggage - Accessories
Regions
Africa Sub-Saharan Africa Western Africa
Sectors
Civil Works Building Environment and Pollution-Recycling Automobiles and Auto Parts Non-Renewable Energy Supply Bridges and Tunnels Engineering Postal and Courier Services Roads and Highways-Bridge Oil and Gas Infrastructure Law and Legal Printing and Publishing Services Cement and Asbestos Products Railways-Rail-Railroad Education and Training Defence and Security Electricity Infrastructure and Tunnels Construction Energy-Power and Electrical Computer Hardwares and Consumables Steel Industry Aviation Building Material Construction Materials Marine
URL
Share
To be notified
when a tender matching your filter is published
To Follow
Tenders
Add New Tender Alert
To Follow
Contracts
Add New Contract Alert
To Follow
Fairs
Add New Fair Alert