Supply and Delivery of Various Laboratory Supplies Request for Quotation (RFQ)   Reference Number 11331473   Procuring Entity FOREST PRODUCT RESEARCH AND DEVELOPMENT INSTITUTE ( FPRDI )   Title Supply and Delivery of Various Laboratory Supplies   Area of Delivery Laguna   Printable Version Solicitation Number: RFQ 2024-782 Trade Agreement: Implementing Rules and Regulations Procurement Mode: Negotiated Procurement - Small Value Procurement (Sec. 53.9) Classification: Goods Category: Laboratory Supplies and Equipment Approved Budget for the Contract: PHP 252,520.00 Delivery Period: 30 Day/s Client Agency: Contact Person: Ralph Nathaniel L Burton Science Research Assistance College, Los Baños Laguna Philippines 4031 63-49-5363362 ralphnathanielburton@gmail.com Status Active Associated Components Order Bid Supplements 0 Document Request List 0 Date Published 08/10/2024 Last Updated / Time 08/10/2024 12:00 AM Closing Date / Time 16/10/2024 6:00 PM Description NOTE: send your quotation to ralphnathaniel.burton@fprdi.dost.gov.ph NOTE: send your quotation to ralphnathaniel.burton@fprdi.dost.gov.ph STOP WATCH Product Description: Water and shock resistant case. Accuracy within 2 seconds a day 1/100 second count up to 40 minutes 1 second count up to 23h, 59m, 59s Normal time with alarm Supplied with a cord lanyard Type: Pocket Digital/Analogue: Digital Maximum Time: 23h 59min 59s; Resolution: 1; 0.01 s Maximum Time Hours: 23h Maximum Time Minutes: 59min Maximum Time Seconds: 59s Accuracy: 2 second over 24 hours Functions: Start/Stop/Reset Alarm Function: Yes Calendar: Yes Water Resistance: Water Resistant Case Material: Plastic Color/Finish: Black Digit Heights: 12.4mm & 10.8mm Display: LCD Single Operating Voltage: 1.5V Battery Type: CR2032 Lithium HOT WIRE ANEMOMETER Specifications Range Display: Triple display, 4 digit LCD reading. Sampling Rate: once per second Response Time: < 2 seconds Manual Memory Capacity; 5 X 99 sets. (Direct reading from LCD display) Operating Conditions: 0°C —40°C (32°F 104°F) 10 —80% Power Source: 6 X AAA Battery Battery We: Approx. 10 hours Dimensions: 360.7 X 216 X63.5mm (114.2 X W8.5 X H2.5 in) with case Weight: 1043g ( 2.3 Lbs) with case Probe Dimensions / Weight: Wire length : 2.2 meter (7.2 ft) Probe length : 1.2 meter (3.9 ft) Probe diameter of tip : 15.0 mm (0.59 in.) Probe diameter of base : 28.0 mm (1.1 in.) Probe weight : 165 g (0.36 lbs) Air Flow: 0.1 to 30.0 m/s, 0.2 to 110 km/hr, 10 to 6000 ft/min, 0.1 to 59 knots, 0.12 to 68 MPH Accuracy: ±3% of reading, .±1%FS Air Flow Volume: 0 to 999900 UM, 0 to 999900 CMM Temperature: -20°C to +60°C, ±0.5°C / -4°F to +140°F, t0.9°F Humidity: 0 to 100%RH ±3%RH Included Accessories: Users manual, Batteries, Hard carrying case, USB Cable, and CD Software INFRARED THERMOMETER Specifications: Infrared temperature range: -40 °C to 800 °C (-40 °F to 1472 °F) Infrared accuracy: < 0 °C (32 °F): ± (1.0 (± 2.0 °F) 0.1°/1 °C or °F); > 0 °C (32 °F): ± 1 % or ± 1.0 °C (± 2.0 °F), whichever is greater Display resolution: 0.1 °C / 0.1 °F Infrared spectral response: 8 pm to 14 pm Infrared response time: < 500 msec Thermocouple: Type-K Input temperature range: -270 °C to 1372 'C (-454 °F to 2501 °F) Thermocouple Type-K input accuracy: -270 'C to -40 'C: ± (1 °C + 0.2 °/1 °C) (-454 °F to -40 °F: ± (2 °F + 0.2 °/1 °F)); - 40 °C to 1372 °C: t 1% or 1 °C (-40 °F to 2501°F: ± 1 % or 2 °F), whichever is greater 0:5 (distance to measurement spot size): 50:1 Laser sighting: Single-point laser < 1 mw output Class 2 (II) operation, 630 nm to 670 nm Minimum spot size: 19 mm (0.75 in) Emissivity adjustment: By built-in table of common materials or digitally adjustable from 0.10 to 1.00 by 0.01 Data storage with Date/Time stamp: 99 points PC Interface and cable: USB 2.0 with FlukeView* Forms software Hi/Low alarms: Audible and two-color visual Min/Max/Avg/Dif: Yes Display: Dot matrix 98 x 96 pixels with function menus Backlight: Two levels, normal and extra bright for darker environments Trigger lock: Yes Switchable Celsius and Fahrenheit: Yes Power: 2AA/LR6 Batteries and USB when used with a PC Battery life: If used continuously: laser and backlight on,12 hours; laser and backlight off, 100 hours Operating temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -20 'C to 60 °C (-40 °F to 140 °F) Bead thermocouple Type-K range: -40 °C to 260 °C (- 40 °F to 500 °F) Bead thermocouple Type-K accuracy: ± 1.1*C (2.0 °F) from 0 °C to 260 °C (32 °F to 500 °F), typically within 1.1 °C (2.0 °F); from -40 °C to 0 °C (-40*F to 32 °F) LASER DISTANCE METER Features: Ultra Sharp Class II Lasers clearly highlight the point being measured. Exceptional distance range allows accurate measurements up to 328' (100 m). Adjustable units enable you to quickly read feet, inches or meters on the fly. Bright backlit display for use in poorly lit areas. Quick and accurate calculations on the spot. Displays the last three measurements, stores the last 20 measurements. Rubberized over-molding for a solid grip. Specifications: Measurement Accuracy: ±1/16" (1.5 mm). Range: 328 ft. (100 m). Measurement Units: Inches, feet and meters. Measurement Calculations: Area, volume and indirect measurement calculations. Power Source: 2 AAA batteries (included). Ruggedness: IP 54 dust proof, splash proof. Heat Flux Sensor (HFS - 6) Specification: Sensor Type: Differential-Temperature Thermopile Encapsulation Material: Kapton (polymide), Copper, High Temperature Nominal Sensitivity: Approx. 70 - 90 mV/(W/cm2) Sensor Thickness (t): Approx. 600 microns Specific Thermal Resistivity: Approx. 0.9 k/(kW/m2) Heat Flux Range: ± 150 kW/m2 Temperature Range: -50 °C to 120 °C Respose Time: Approx. 0.9 sec Sensor Surface Thermocouple: Type-T Sensing Area Dimensions (cm): a = 8.6 cm , b =- 8.6 cm Total SensorDimensions (cm): W = 9.1 cm , H 10.0 cm Sensing Area (cm2): 74 cm2 Preferably: OMEGA or equivalent Heat Flux Sensor (HFS - 5) Specification: Sensor Type: Differential-Temperature Thermopile Encapsulation Material: Kapton (polymide) Nominal Sensitivity: Approx. 14.0 mV/(W/cm2) Sensor Thickness (t): Approx. 360 microns Specific Thermal Resistivity: Approx. 0.9 k/(kW/m?) Absolute HFS Thermal Resistance: Approx. 1.0 K/W Heat Flux Range: t 150 kW/m2 Temperature Range: -50 °C to 120 'C Respose Time: Approx. 0.6 sec Sensor Surface Thermocouple: Type-T Sensing Area Dimensions (cm): a = 2.5 cm , b = 2.5 cm Total SensorDimensions (cm): W = 2.7 cm , H 3.4 cm Sensing Area (cm2): 6.3 cm' Total Sensor Area (cm2): 9.2 cm2 Preferably: OMEGA or equivalent Heat Flux Sensor Data Acquisition (HFS DAQ) Specification: Input Voltage Resolution: < luV Number of Input Channels: 8 differential Cold Junction Compensation: Yes, provided by on-board thermostat CJC Thermistor Accuracy 2 °C absolute accuracy Input Voltage Range: ± 2.048 Volts Analog-to Digital Converter Type: 24-bit Delta- Sigma Output Voltage Noise: 0.85 pV RMS Computer Interface Type: US8 Cable Maximum Sampling Rate: Approximately 3Hz Standard Thermocouple Type: Type-T Preferably: OMEGA or equivalent Industrial Fan SPECIFICATIONS: 16 inch blade "speed control system wing aluminum blade ;ciliation control tustable fan head ijustable stand height iermal fuse protected motor iailable color: chrome plated milar or equivalent to: Hanabishi dustrial Stand Fan HISF160" Brushless Cordless 1/2" Hammer Drill/Driver SPECIFICATIONS: Voltage: 20V Max Battery Type: Lithium-Ion (Li-Ion) Max. Torque: 90 N.m No Load Speed (Drilling/Driving Mode): 2,000 RPM No Load Speed (Hammer Mode): 2,000 RPM Impact Rate: 34,000 BPM Power Output: 850W No. of Gears: 2 Chuck Capacity: 13mm 1 x (DeWalt DCD805 or equivalent) Brushless Cordless 1/2" Hammer Drill/Driver 20V MAX 1 x Charger 2 x 4.OAh Battery NOTE: send your quotation to ralphnathaniel.burton@fprdi.dost.gov.ph NOTE: send your quotation to ralphnathaniel.burton@fprdi.dost.gov.ph NOTE: send your quotation to ralphnathaniel.burton@fprdi.dost.gov.ph ================================= IMPORTANT REMINDERS: Please observe the following instructions below when accomplishing the FPRDI RFQ Form. 1. Accomplish this RFQ correctly and accurately. 2. Do not alter the contents of this form in any way. 3. Indicate "No-Bid", “No Quote” or “No Offer” for items not intended to bid 4. All technical specifications are mandatory. Failure to comply with any of the mandatory requirements will disqualify your quotation. 5. Failure to follow these instructions will disqualify your entire quotation. Bid can be submitted thru our official e-mail account at ralphnathaniel.burton@fprdi.dost.gov.ph stating PhilGeps Reference No. or thru express mail/courier. Your quotation will only be valid when sent to this e-mail account. Please use our official FPRDI Request for Quotation (RFQ) form. Kindly complete all the details in our official RFQ form including Unit Price and Total Price. Just attach any additional details/descriptions you would like to include in your bid. Please submit scanned/photocopies of the following documents as required by PhilGeps for Small Value Procurement - Mayor's permit (CY 2024) - Philgeps registration - Omnibus Sworn Statement (OSS). Please be reminded to use the latest OSS template issued by GPPB and to indicate the names of the Project and the Procuring Entity. Alternatively, you can submit your sealed quotation to this address on or before the closing of bid Property and Supply Section/BAC Secretariat DOST-FOREST PRODUCTS RESEARCH AND DEVELOPMENT INSTITUTE Narra Rd. Forestry Campus, College, Los Baños, Laguna 4031 Created by Ralph Nathaniel L Burton Date Created 07/10/2024 The PhilGEPS team is not responsible for any typographical errors or misinformation presented in the system. PhilGEPS only displays information provided for by its clients, and any queries regarding the postings should be directed to the contact person/s of the concerned party.       FOREST PRODUCT RESEARCH AND DEVELOPMENT INSTITUTE ( FPRDI )